We've all done it, but yeah sounds good :) ------------------------------ ANDREY LEO ------------------------------

Yeah i've had a look on the chassis and the CPU is normal so looks like solarwinds is freaking out. Was the only odd thing in the logs so i've put 2+2 together and come up with 5! Thanks for the filter sytax though going to put that on! ------------------------------ STEVEN LOWERY ----------- ...

There should be no way that the CPU load is that high because of that message. It's just the startup time of the device, displayed in EPOC time. You can use this to convert it to a time if you're interested - Epoch Converter - Unix Timestamp Converter But you should just filter out the message ...

Hi Rob, the line: " ss=StartShell(dev) ss.open()" should be ss=StartShell(dev) ss.open() Maybe it was only a typo. After I changed this, it worked well. If you still have problem, check that you use the latest pyez ------------------------------ Kalle Andersson --------------------------- ...

yes I plan to upgrade SRX 5400 but issue is this SRX 5400 not under contract, it's already expired, not sure JTAC team will support to get the load for upgrade? Also if I do clean boot format, then another challenge needs to be on site. Do I needs to back up License it' already installed, if so please ...

Hi Bala, First of all i think u need to upgrade your firmware first. If after u upgrade the result is same then possiblity due to maximum limitation SPC2 card. Please take note on SRX5k series all the security feature throughput depend on SPC2 card. Thanks

Thank you, it means SPC2 not supported for SRX 5400, needs to get a New SPC3 card in order to work? so what is the limitation for SPC2, no throuput at all? Can I run 1G date on SPC2? just want to understand. Thanks alot. ------------------------------ BALA BALASUNDARAM ------------------------ ...